$173.65 Out of Stock
Coal Tar Epoxy is a two pack which employs a co-reacting polyamide resin and an aromatic polyamine catalyst as curing agents. It is self priming and exhibits good adhesion qualities to clean structural steel and concrete surfaces. It has excellent water resistance, good chemical and oil resistance, and is not significantly affected by continuous exposure to direct sunlight.This paint is suitable for use on steel surfaces subjected to fresh water immersion, tidal or splash zone exposures, buried exposures and for interiors of tanks containing crude oil, salt brine and petroleum products. The cured coating imparts little or no odour and taste to water, but with respect to toxicity is no longer recommended for the interior surfaces of portable water tanks. This paint is primarily intended for use both as a primer and finish coat over clean steel in chemical or marine environments, on buried tanks and pipes, on steel immersed in fresh or salt water, in tidal, splash and weather zone exposures, and for interiors of tanks and lines containing crude oil, salt brine or caustic soda.Black satin finish.Use as both a primer and finishing coat.Suitable for use on clean steel in either chemical or marine environments, buried tanks or pipes and on steel immersed in fresh or salt water.Made in NZ for NZ conditions.Coverage approx. 4m²/L @ 200 microns D.F.T.Apply with brush, roller or high pressure airless spray / heavy duty conventional spray.Recoat Minimum: 12 hours. Maximum: 36 hours.
©2022 Cater Marine Site by RAZOR Web Design